FARBY C-POX TL Tank-Linings

 

C-Pox CT940 (7P940) In general, for metallic or concrete buried surfaces under immersion in water. Ideal solution for
sewage treatment plants and for immersion in water (half-door, ducts, etc..).
Not suitable for potable water.
Further to its great (fresh and salt) water resistance, also shows a good chemical resistance
(acids or alkali solutions, mineral oils, some hydrocarbons, etc.). Not suitable for chlorinated
solvents or aromatic hydrocarbons.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Enamel S200 (7M200) For the protection of interior and exterior surfaces when good mechanical and anticorrosive
properties are required as well as providing resistance against corrosive fumes, splashes and
spillages of chemicals and solvents. It is also recommended for concrete floors subject ho heavy
traffic.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer FA (7K586) Anticorrosive protection for use on steel, galvanized or zinc plated steel, aluminium and stainless
steel under extreme atmospheric conditions.
Suitable as adherence primer over ceramic surfaces on interior.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer SP120 (7K120) Primer for temporary steel protection recently blasted (maximum 3 months) on weathering
conditions and corrosive category C-3 (ISO 12944-2).
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer TC153 (7K153) Holding primer to protect blasted steel until definitive topcoat application. Sealer for ethyl silicate
primers (Cincoat Primer IZS920 and Cincoat Primer IZS925), to avoid popping formation.
Suitable for industrial systems as structural steel, tanks and pipings for immersion and nonimmersion
services.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZN500 (7K500) C-Pox Primer ZN500 is a zinc epoxy primer, which proper topcoats provides a good corrosion
protection and withstands splash or spillage of water, solvents, chemicals and petroleum
products. C-Pox Primer ZN500 may be used on structural steel, machinery pipes and tank exteriors in oil
refineries, paper mills, power plants, chemical process and waste treatment plants.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZN650 (7K650) C-Pox Primer ZN650 may be used on structural steel, on exterior of machinery pipes and tanks
in oil refineries, paper mills, power plants, chemical process and waste treatment plants, etc.
With proper topcoats provides a good corrosion protection and withstands splash or spillage of
water, solvents, chemicals and petroleum products.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZN800 (7K800) Industrial – Structural steel, machinery pipes and tank exteriors in paper mills, oil refineries,
power plants, chemical process and waste treatment plants.
Marine – Decks, hulls and superstructures of ships, barges and workboats. Piers, offshore
platforms and related structures.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZN860 (7K860) Primer for epoxy and polyurethane paint systems in very aggressive environments. Resists
splash or spillage of water, solvents, chemicals and petroleum products.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZN905 (7K905) Primer in epoxy or polyurethane paint schemes for substrates in highly aggressive environments
and in continuous and periodic immersion in water, saline solutions and petroleum products, for
industrial and maritime use.
Industrial – Steel structures, tubes, machinery and tank exteriors in paper mills, refineries, power
stations, chemical plants, etc.
Maritime – Decks and superstructures of ships, jetties, pillars and metallic structures on
platforms.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZP150 (7K150) Industrial – Structural steel, machinery, pipes and tank exteriors in paper mills, oil refineries,
power plants, chemical process and waste treatment plants, for non immersion service. For
immersion systems, consult our Customer Service.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZP160 FD (7K160) Industrial – Structural steel, machinery, pipes and tank exteriors in paper mills, oil refineries,
power plants, chemical process and waste treatment plants, for non immersion service.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZP200 HB (7K200) Industrial – Structural steel, machinery, pipes and tank exteriors in paper mills, oil refineries,
power plants, desalination plants, chemical process and waste treatment plants.
Marine – Decks, topsides and superstructures of ships, barges and workboats. Piers, offshore
platforms and related structures. Interiors of cargo holds.
Technical Data Sheet
Material Safety Data Sheet
C-Pox Primer ZP205 FD (7K205) Industrial – Structural steel, machinery, pipes and tank exteriors in paper mills, oil refineries, power
plants, chemical process and waste treatment plants.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S100 (7L-100) C-Pox S100 is a high build polyamide epoxy coating with high solids content designed for
industrial and marine use. It adheres strongly to bare steel, and inorganic zinc primers and
silicate coatings on new construction, repairs and field maintenance projects. C-Pox S100
provides and excellent barrier to corrosion. C-Pox S100 may be overcoated with itself in nonimmersion
conditions for an unlimited period.
Marine – Decks, superstructures and ballast tanks of ships, barges and workboats.
Industrial – Tank exteriors, structural steel pipes in water treatment plants, refineries, pulp and
paper mills and waste water treatment plants. Offshore platforms, jetties and other structures
exposed to severe weathering, water, salt spray, immersion or aggressive chemical
environments.
C-Pox S100 is an alternative for traditional coaltar epoxies and is suitable for immersion in both
salt and fresh water. It is specifically suitable as marine ballast water tanklining.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S130 FD (7L130) Recommended for tank exteriors, structural steel and piping in chemical plants, refineries, pulp &
paper mills, offshore platforms, ship hulls and other structures exposed to severe weathering or salt
spray. Obtain specific recommendations from your representative when using C-Pox S130 FD or
weather immersion service conditions.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S135 FD (7L135) Intermediate coat on paint systems for protection of steel structures, exterior of tanks, paper mills
and waste water treatment plants. Also suitable for offshore platforms, ship hulls and other
structures exposed to severe weathering or salt spray.
When used in exterior, normally in aggressive atmospheres, it is recommended to use rich zinc
primers in order to have better cathodic protection, and UV resistant top coats.
Can also used as a primer on two-coat systems in non-aggressive environments or three-coat
systems in aggressive environments.
It can also be used as topcoat for indoor structures.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S140 Miox FD (7L140) Intermediate coating for highly durable paint systems on surfaces subjected to aggressive chemical
action in maritime and industrial environments.
Primer for two coat systems in non aggressive environments or three coat systems in aggressive
environments.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S160 C (7L160) Recommended for application in maritime or chemically aggressive industrial environments, such
as tanks and metal structures within refineries, in the pulp and paper industry, in the chemical
industry and on off-shore platforms.
Used in installations or equipment subject to splashing and spillages of chemical products and
solvents. When used as a topcoat and exposed to adverse weather conditions it may exhibit
slight chalkiness and fading of dark colours; however this does not alter its characteristics.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S600 CP (7A600) Exterior of pipes, equipment and underground tanks.
Interior of water and crude oil tanks.
Equipment for water purifying plants, the chemical industry and storage tanks, etc.
Suitable as a coating for concrete in harsh conditions.
Good resistance to chemical products (seek advice).
When applied in enclosed areas, it reduces the risk of explosion.
Compatible with cathodic protection.
Complies with the requirements of Standard EN 10289 Type III Class C.
Technical Data Sheet
Material Safety Data Sheet
C-Pox S990 MIO FD (7L990) Intermediate coat in long life systems for substrates under to chemical aggressions in marine and
industrial environments.
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST160 MP (7N160) C-Pox ST160 MP is a specially formulated high performance coating for highly corrosive
industrial installations and paint systems for the inside of wind turbines. On steel and concrete
structures under condensation and aggressive conditions, C-Pox ST160 MP has good resistance
to acid and alkaline fumes and splashes, solvents and to fresh and salt water.
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST165 MP-WN (7N165) Specially formulated as high performance coat, to protect steel structures, industrial installations,
bridges, exterior of tanks, deposits, piping and water condensation areas, marine weathering, etc.
Can be applied over wet surfaces.
Excellent product for bridges maintenance or floodgates protection.
It can be used for concrete protection in water immersion.
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST170 (7N170) Specially formulated as a high performance coating on steel and concrete surfaces in industrial
facilities, bridges, tank exteriors, containers, oil tanks, piping, roofs and other areas subject to
moisture, high humidity, marine weathering and other exposure.
On interiors, C-Pox ST170 / C-Pox ST170 FD does not require a topcoat. Contact with Costumer
Service for specific recommendations.
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST170 FD (7N175) Specially formulated as a high performance coating on steel and concrete surfaces in industrial
facilities, bridges, tank exteriors, containers, oil tanks, piping, roofs and other areas subject to
moisture, high humidity, marine weathering and other exposure. C-Pox ST170 FD has good
resistance to splash, spillage and fumes of acids, alkalis, solvents, fresh and salt water.
For immersion in fresh and seawater, abrasive blasting to Sa 2½ is required. On interior, C-Pox
ST170 FD can be used as topcoat. Contact with the Costumer Service for specific
recommendations.
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST180 AL (7N180) C-Pox TL180 AL is recommended for maintenance where blasting is impractical or impossible. It
is recommended for steel structures protection in maritime and industrial weathering, as for
example: bridges, tanks, piping or other steel structures subject to high humidity.
Primer or intermediate coat in epoxy systems, for steel surfaces protection subject to a
aggressive chemical exposures.
Can be used as primer for high temperature systems with Silicofer HT200 and Silicofer HT200 AL.
It is possible to apply on surfaces treated with water jetting (water jet to high pressure), according
to NACE nº7/SSPC-VIS-4(I).
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST180 AL-FD (7N185) C-Pox ST180 AL FD is recommended for maintenance where blasting is impractical or
impossible. It is recommended for steel structures protection in maritime and industrial
weathering, as for example: bridges, tanks, piping or other steel structures subject to high
humidity.
Primer or intermediate coat in epoxy systems, for steel surfaces protection subject to a
aggressive chemical exposures.
Can be used as primer for high temperature systems with Silicofer HT200 and Silicofer HT200 AL.
It is possible to apply on surfaces treated with water jetting (water jet to high pressure), according
to NACE nº7/SSPC-VIS-4(I).
Technical Data Sheet
Material Safety Data Sheet
C-Pox ST300 GF (7N300) C-Pox ST300 GF is suitable for the protection of steel and concrete structures in severe
environments, including marine structures, process installations, petroleum storage and other
heavy industrial installations. On offshore platforms, C-Pox ST300 GF can be used in splash and
tidal zones, under-deck areas and submarine installations.
Technical Data Sheet
Material Safety Data Sheet
C-Pox TL735 NCA (7M735) Provides excellent protection to interior of tanks as well as cisterns in petrochemical and other
industries: water containers, liquid fuel (oxygenated gasoline with methanol, fuel, querosene,
etc.,) as well as neutral and alkaline water solutions. Not suitable for oxidants.
Technical Data Sheet
Material Safety Data Sheet
C-Pox TL740 (7M740) In paint systems for the interior of storage tanks which contain petroleum products such as
diesel, jet fuel, unleaded petrol(a), kerosene, some acids, aliphatic hydrocarbons and different
types of water at high temperatures. (up to 100ºC in immersion).
a).- Unleaded petrol oxygenated with MTBE. (methyl terbutil ether).
Technical Data Sheet
Material Safety Data Sheet
C-Pox TL750 (7M750) C-Pox TL750 is recommended for interior of tanks for water (non potable), sea water, petroleum
products, various solvents, saline solutions and alkaline solutions.
Technical Data Sheet
Material Safety Data Sheet
C-Pox TL760 (7M760) C-Pox TL 760 is used in maritime and industrial weathering providing protection to interior of fuel
tanks and water tanks in ships, for water ballast tanks, fuel oil tanks and petroleum products.
C-Pox TL760 paint system consists in two coats, first in ivory and the second in white.
Technical Data Sheet
Material Safety Data Sheet
C-Pox TL790 FG (7M790) C-Pox TL790 FG is a solvent free high performance coating that can be applied with standard
airless equipment for use as tank lining for food products (solid foods, potable water, alcoholic
drinks until 50º content, juices and oils) and no food products.
Can be used in tank cars and railroad tanks for products earlier referred. C-Pox TL790 FG is an
excellent barrier coat, providing long term resistance to corrosion.
Note: For use on concrete surfaces, Cromodrol Sealer may be required. Obtain specific
recommendations from Customer Service.
Technical Data Sheet
Material Safety Data Sheet
C-Pox TL830 (7M830) It is specially recommended for the repair and reinforcement of tanks, affected by corrosion,
generally applied with glass fibers (contact our Customer Service for more information about the
glass fiber to be used).
It is suitable as tank lining for non potable water, crude, gas-oil, fuel-oil, kerosene and aliphatic
solvents.
Technical Data Sheet
Material Safety Data Sheet
C-Pox W200 HB (7A200) Surface protection of concrete tunnels and concrete structures of buildings, car parks and
industrial warehouses, where a washable and resistant surface is desired. It is an excellent
alternative to ceramic tiles, with the advantage of being a seamless surface without joints.
Technical Data Sheet
Material Safety Data Sheet